I. Core Design Parameters

Dimensional Requirements

• Minimum dimensions recommended: Length ≥15m × Width ≥6m × Height ≥4.5m (to accommodate double-decker buses or extended trucks).

• Modular design: Expandable structure for future extensions (e.g., additional workstations or increased height).

Structural Materials

• Framework: Galvanized steel structure for corrosion resistance and dynamic load capacity.

• Walls/roof: Double-layer insulated color steel panels (rock wool core) for thermal insulation and noise reduction.

• Flooring: Anti-static epoxy flooring with anti-slip texture to prevent paint mist accumulation.

II. Key Equipment Selection

Spray System

• Dust-free environment: Three-stage filtration (primary + intermediate + high-efficiency filters, ≥98% efficiency).

• Spray equipment: High-pressure airless spray guns (flow rate ≥20L/min) with adjustable nozzles for large-area coverage.

• Lighting: Explosion-proof LED strips (illuminance ≥800 Lux) to ensure uniform coating.

Curing Oven System

• Energy options:

  • Gas heating: ≥85% thermal efficiency, ideal for continuous operation.

  • Electric heating: Lower upfront cost but higher operational expenses (dependent on local electricity rates).

• Temperature control: PID-regulated ±2°C accuracy, curing temperatures adjustable between 60–80°C based on paint specifications.

Ventilation System

• Airflow calculation: ≥100 air exchanges per hour (e.g., 150,000 m³/h for a 30m×10m×5m space).

• Energy-saving design: Heat recovery devices (e.g., heat exchangers) reduce energy consumption by ≥30%.

III. Safety & Environmental Compliance

Safety Measures

• Explosion-proof design: ATEX/IECEx-certified electrical equipment and ventilation motors.

• Fire protection: Automatic sprinklers + combustible gas detectors linked to emergency exhaust.

• Emergency protocols: Emergency stop buttons and escape routes (width ≥1.2m).

Environmental Requirements

• Waste gas treatment:VOC removal: Activated carbon adsorption + RCO catalytic combustion (≥90% efficiency).

• Particulate filtration: Wet scrubbers or bag dust collectors.

• Noise control: Soundproofing for equipment (≤75 dB(A)).

CoatTech

At CoatTech, we pride ourselves on our expertise in customized technology solutions.

Our engineers and sales managers are passionate about the products we design and sell.

Our sincere service has earned the trust of our clients.

CoatTech is a close-knit family. We welcome you to visit us anytime.

CoatTech Custom Solutions

CoatTech specializes in providing customized technology solutions, including advanced coating lines,

spray booths, paint preparation rooms, mixing rooms, and other facilities to meet your needs.

We have numerous real-world cases in the automotive, industrial, furniture/woodworking, and aerospace sectors.

Partner with CoatTech to receive equipment tailored to your specific requirements!